Is a 4.1 sound system compatible with 5.1

Soundbar with wireless surround speakers and subwoofer.A 5.1 channel setup can come in several configurations. 5.1 ChannelsДЄ 5.1 channel setup is the most commonly used as it provides a good surround sound experience for most listeners. Soundbars using this type of configuration in combination with a subwoofer are usually referred to as 3.1 channel systems. TIP: Sometimes a soundbar may include a built-in center channel speaker (in addition to the built-in left and right speakers) that allows independent control of dialog and voice. The Subwoofer should be located in the left or right area of the front wall between the two front speakers.Also, the left and right speakers should be angled in slightly so that sound is more precisely directed to the main listening position ( referred to as the sweet spot). Speakers should not be placed flush to the wall or corner - place them several inches away from the corner or wall. The Left and Right Main/Front speakers should be located along or in the corners of the front wall at the same distance from your seating position at about a 30-degree angle.The result is that the voice or vocal appears to come from the empty center space between the left and right channel speakers. Also, one of the speakers provides a subwoofer output that is used to connect to a powered subwoofer (usually an optional purchase).ДЄlthough specific sounds are assigned to either the left or right channel, vocals and dialog are placed into both channels. In this type of system, either the left and right speaker both have built-in amplifiers, or one speaker (usually the left speaker) houses the amplifiers for both speakers via a wired connection. The 2.1 setup option can also be used with select powered speaker systems (the Klipsch Fives and Fluance Ai60вЂ™s are two examples). The soundbar houses the left and right channel speakers, while an external subwoofer is many times provided (or can be added on as an optional purchase) to provide the lower frequencies. A 2.1 channel setup is the same as the familiar setup for stereo (2.0) but with a subwoofer added to the mix.Дў.1 channel setups make it easier to use smaller bookshelf speakers for the left and right channels, and a subwoofer for the lower frequencies.ДЄnother common application of 2.1 is with soundbars. 2.1 channelsДЄ 2.1 channel setup consists of one left channel, one right channel, and a subwoofer channel. Both subwoofers typically contain the same low-frequency sound information but 2 or more subwoofers are sometimes used to compensate for acoustical deficiencies in a specific room. In this case, the system may be referred to as a 5.2 or 7.2 channel system. TIP: Some home theater systems allow the connection of a 2nd subwoofer in a 5 or 7 channel system. 1 represents the subwoofer which is placed on the floor. The 2, 5, and 7 represent the number of channels where the speakers are laid out in a horizontal plane preferably placed at approximately ear level, while the. This means that the left front speaker is assigned to the left front channel, with other speakers assigned to the other channels accordingly. In most surround sound formats, each speaker is assigned to a specific channel. Speakers: This is how the channel information is reproduced so it can be heard. Once decoded or processed, the surround sound information is divided and assigned to one of several channels and sent through an amplifier to a set of speakers. The most common stereo and surround sound channel/speaker setups in use are 2.1, 5.1, and 7.1.Дў.1, 5.1, and 7.1 refer to the number of amplified channels provided and, in most cases, the number of speakers needed to set up the system.Д¬hannels: How the sound is directed is designated by the encoding used by the source and decoding or processing used by an integrated home theater system, home receiver, av/preamp processor, or soundbar. With the beginnings of the home theater in the 1970s and вЂ80s, surround sound was introduced which resulted in expanded speaker layouts that placed sounds all around the room. When stereo (aka two-channel stereo or 2.0) sound became available to consumers in the 1950's it added a more realistic soundstage for music listening where instruments and vocals could be separated and placed to the left and right front sides of the listening room.

Is a 4.1 sound system compatible with 5.1